Water-in-Sand Coating

Stone Coatings

Water-in-Sand Coating

水包砂

Multicolour stone effect with a three-dimensional finish.

A multicolour stone coating that sprays in one pass to create granite-inspired surfaces with 3D, 4D and 5D relief options.

Exterior / InteriorStone EffectTrowel / Spray

Overview

Water-in-Sand suspends coloured stone granules in a protective emulsion. When sprayed, the granules settle into a natural stone pattern with visible depth and shadow, reproducing the character of granite without the weight of stone.

Finishes

3D Fire-Burned4D Lychee5D Rock4-Series Rock

Colour range: 3D-301 to 322 · 4D-411 to 423 · 5D-501 to 510 · 401 to 408

Product Highlights

  • 3D fire-burned, 4D lychee and 5D rock finishes
  • One-pass spray application
  • Multicolour stone appearance
  • Suitable for large facades

Technical Data

Product typeMulticolour stone coating
ApplicationExterior walls
Finish3D / 4D / 5D
PackagingTo be confirmed
CoverageTo be confirmed
Shelf lifeTo be confirmed
WarrantyTo be confirmed

Before / After

From bare wall to finished surface

Bare plaster on the left, the finished LIMEKA surface on the right.

Bare wall
Water-in-Sand Coating
Bare wallFinished surface

Coating System

How this finish is built

An exploded view of the wall build-up. The highlighted layer is the product supplied by LIMEKA.

Layered coating system cutawaySchematic cutaway. Not to scale.
  1. 01
    Substrate
    Concrete or masonry wall, sound, dry and level.
  2. 02
    Levelling Coat
    Cement mortar or skim coat to flatten the substrate.
  3. 03
    Primer
    Alkali-resistant primer for adhesion and alkali resistance.
  4. 04
    Base Coat
    Pigmented base coat to unify the background colour.
  5. 05
    Water-in-Sand Coating
    Spray-applied stone coating - the layer supplied by LIMEKA.
  6. 06
    Clear Topcoat
    Water-based protective topcoat for water and stain resistance.

Related Products

Water-in-Sand Coating | LIMEKA